STARTING COMBINATION METER SELF-DIAGNOSIS MODE
NOTE:
• Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to
MWI-66, “COMBINATION METER : Diagnosis Procedure”. Replace combination meter if power supply and
ground circuits are found to be normal and self-diagnosis mode does not start. Refer to MWI-86, “Removal
and Installation”.
• Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter selfdiagnosis
mode will exit upon turning the ignition switch to OFF.
How to Initiate Self-Diagnosis Mode
1. Turn ignition switch OFF.
2. While pressing the trip reset switch (1), turn ignition switch ON.
3. Keep the trip reset switch for 1 seconds or more.
4. Press the trip reset switch at least 3 times. (Within 7 seconds
after the ignition switch is turned ON.)
5. “Work instruction code” is indicated in the top portion of information
display and self-diagnosis is started.
6. The mode switches in the order shown below each time the trip
reset switch is pressed.
NOTE:
If the trip reset switch is not operated for 20 seconds or more, the
self-diagnosis mode is automatically cancelled.
Cytat z instrukcji serwisowej.
Będą sprawdzane wszystkie lampki kontrolne i zobaczysz czy działa.
Sprawdzałem i test działa QQ 1.2 z 2014 r.